The MS1200-S is part of the next generation of Multisensor Systems’ on-line Oil in Water and
Pollution Analysers and is designed to protect drinking water treatment plants from pollution
events at the raw water intake. These events can result in expensive Filter replacement and cleanup
operations and may also affects the quality of drinking water with regulated pollutants such
as BTEX, trichloroethylene, tetrachloroethylene, vinyl chloride reaching the customers.
Features:
- Accurate to low ppb concentrations
- Relay Control of Users’ Pumps and Valve
- Detects VOCs, BTEX, Fuel Oils and PAH
- High Sensitivity and accurate Continuous Measurement
- Power Diagnostics
- Versatile Communication Protocols
- Insensitive to High Turbidity
- Low Maintenance, Do not need to perform cleaning to Sensor
Applications:
- Contamination alerts at raw water intakes
- Monitoring of drain and stormwater systems
- Detection of fuel pollution in surface water
- Measurement of breakthrough in carbon beds
- Reverse osmosis membrane protection
- Protection of desalination plants
Technical Specifications
| Detection Range | 1 ug/L (ppb) ~ 3000 ug/L (ppb) as Total VOCs |
| Accuracy | +/- 10% |
| Repeatability | +/- 2% |
| Analogue Output | 1 x 4 – 20 mA, Max Load: 750 Ohms |
| Relay Output | 1 x Alarm Relays 1 x Fault Relay [NO and NC Contacts / Rating: 250VAC or 30VDC / 5A] |
| Interface | Touch Screen Panel PC |
| Power Supply [Power Consumption] | 90 ~ 240 VAC, 50/60Hz [25 Watts Max] |
| Communication Protocols | Modbus (Optional) / Profibus / HART / Foundation Fieldbus on request |
| Data Storage | uSD Card / Windows PC |
| Dimension [Weight] | 450 x 680 x 200mm (L x H x W) [30kg] |
| Enclosure IP | IP65 (Powder Coated Stainless Steel) |
| Sample Flow Rate [Temperature] | 2 L/min [1 ~ 50 deg C] |