The MS1210-S is an industrial oil in water analyser designed to monitor the outflows from industrial
facilities, water in cooling systems and to detect fuels and other VOCs in drains and waste water
networks. The presence of pollutants such as BTEX, trichloroethylene (TCE), tetrachloroethylene
(PCE or Perc), vinyl chloride, 1,2-dichloroethane, 1,1,1-trichloroethane, 1,1-dichloroethylene, styrene
can lead to heavy Ones and process contamination.
The instrument works by sensing gases or volatiles to provide a non-contact measurement system
with very low maintenance requirements.
Features:
- Accurate down to 0.1 ppm concentrations
- Contactless Continuous Measurement
- Detects VOCs, BTEX, fuel oils and PAH
- Monitors on Oil Leaks
- Low Operating and Maintenance Costs
- Relay control of users’ pumps and valves
- Powerful diagnostics
- Versatile communication protocols
- Insensitive to High Turbidity
- Low Maintenance with No Sensor Cleaning
- Ideal for Process Water
Applications:
- Monitoring of industrial outflows
- Contamination alert in cooling water systems
- Management of drain and stormwater systems
- Detection of fuel pollution in surface water
- Protection of desalination plants
- Refineries and petrochemical industries
Technical Specifications
| Detection Range | 0.1 mg/L (ppm) ~ 40 mg/L (ppm) as Total VOCs |
| Accuracy | +/- 10% |
| Repeatability | +/- 2% |
| Analogue Output | 1 x 4 ~ 20 mA, Max Load: 750 Ohms |
| Relay Output | 2 x Alarm Relays 1 x Fault Relay [NO and NC Contacts / Rating: 250VAC or 30VDC / 5A] |
| Interface | Touch Screen Panel PC |
| Power Supply [Power Consumption] | 90 ~ 240 VAC, 50/60 Hz [25 Watts Max] |
| Data Storage | uSD Card / Windows PC |
| Dimension [Weight] | 450 x 680 x 200 mm (L x H x D) [30 kg] |
| Enclosure IP | IP 65, Powder Coated Stainless Steel |
| Communication Protocols | Modbus (Optional) / Profibus / HART / Foundation Fieldbus on request |
| Sample Flow Rate [Temperature] | 2 L/min [1 ~ 50 deg C] |